User guide

Chapter 5: Media Server and Gateway Management
72 MAXCS ACC 6.7.1 Administration Manual
To detach a gateway from the MAXCS system,
1. Select the gateway you want to detach.
2. Click Detach. You are asked for confirmation.
3. Click Yes. A message indicates that the detachment was successful, and the Status
field of the gateway reads Disconnected.
To delete a gateway from the Softswitch Component Configuration window, first detach
the gateway. Then select the gateway you want to delete, and click Delete. The gateway
disappears. You can add it back again, if you want, by clicking Add.
Changing Gateway ID and Password
You can change the selected gateway’s unique number (01, 02) and the password by
clicking the Config button in the Softswitch Component Configuration window. This
opens the Gateway Configuration Tool. Make your changes, and click Apply.
Media Server/Gateway Configuration Tool
The configuration tool that opens when you click the Config button in the Media Server/
Gateway Management window can also be opened from the Start > All Programs >
MAX Communication Server ACC/ACM > Gateway menu.
Figure 33. AltiGateway Configuration Tool log-in dialog box
Enter the IP address and password of the gateway you want to check on, and click OK.