User guide

Chapter 5: Media Server and Gateway Management
MAXCS ACC 6.7.1 Administration Manual 69
• Add and delete a gateway
• Attach and detach a gateway
• Change a gateway name, IP address, password, country
• Set TDM Bus mode for a gateway
• Set CT-Bus clock for a gateway
• Set whether the gateway is in service or out of service
To open the Softswitch Component Configuration window, select System > Softswitch
Component Management.
Figure 32. Softswitch Component Configuration window, Media Server/Gateway tab
Setting Parameters
To read or set parameters for a specific gateway, first select the gateway in the list on
the left. After making changes to a gateway, click Apply before selecting another gate-
way. When you are finished with the window, click OK.
Parameter Description
ID/Name/Type
Lists all gateways that have been added using the Add button
in this window.
Status
Shows the status of the selected gateway: active, disconnected,
initializing, resetting, failed. (Read-only field.)
Name The name you gave the selected gateway for easy identification.