User guide

Chapter 4: System Configuration

MAXCS ACC 6.7.1 Administration Manual

#39 – Operator Offline

#44 – Overhead Paging

#45 – Overhead Paging by Trunk

#46 – Group Paging

#53 – Outgoing Workgroup

#54 – Login Workgroup

#56 – Logout Workgroup

#59 – Workgroup Call Monitor

#66 – Trace Collection

#73 – Silent System Call Park

#90 – READY to Receive Workgroup Call

#91 – NOT READY to Receive Workgroup Call

Session Types:

Specify whether or not to allow an AltiGen SDK session for the extension.

Note: If the extension is an IP extension, #26 / #27 is still available when the phone

is in the onhook position, even if it is disabled in the extension’s feature profile.

To add a Feature Profile

By default, a System feature profile is assigned as 0.

To add a new Feature Profile, click the Add button.Type a Name for the feature profile.

Note: When adding a feature profile, the system will automatically assign the lowest

available number.

Select the check boxes for the MAXCS feature codes that you want to be associated with

this feature profile, then click Apply.

After you create a Feature Profile, it can be assigned to a specific extension from the

General page of Extension Configuration. (See “Setting Personal Information” on

page 179 for more information on assigning a feature profile to an extension.)

Caution

If you assign a feature profile (for example: 2 - Sales Group) to an extension in Exten-

sion Configuration, and that feature profile is subsequently deleted and a new feature

profile is created that uses the same number (for example: 2 - Marketing Group), the

extension will automatically be assigned to the new feature profile. So, it is important to

note which extensions are assigned to certain feature profiles, especially when adding

new profiles or deleting old ones.

Limitation

You should include #26 (Station Logout) in a feature profile assigned to an IP phone. If

#26 is disabled in that phone’s feature profile, phone registration issues arise.