User guide

Chapter 3: Getting Around MaxAdministrator
MAXCS ACC 6.7.1 Administration Manual 31
• Report – View the system summary and IP traffic statistics and configure SNMP
(simple network management protocol).
• Diagnostic – View the trace, open the Trace Collector, view the system log, shut
down switching, and view the local IP dialing table. For use by authorized technical
personnel.
• License – View installed licenses and your license key list, add and register addi-
tional licenses, and add or remove members from a license type.
• View – Configure the view windows, the toolbar, and the status bar. Opens the CT
Proxy Monitor.
• Help – Opens the Help window and shows the MAXCS and MaxAdministrator
version. Also gives you a link to the AltiGen Technical Support web site.
Quick Access Toolbar
Toolbar buttons give you quick access to frequently used functions.
Figure 2. MaxAdmin quick access toolbar
From left to right, the toolbar buttons serve the following purposes:
Login. Opens the Password dialog box to log in to the system.
Logout. Logs out of the system.
System. Opens the System Configuration window, or the System
menu. Shortcut for System > System Configuration.
Trunk. Opens the Trunk Configuration window.
Shortcut for PBX > Trunk Configuration.
Extension. Opens the Extension Configuration window.
Shortcut for PBX > Extension Configuration.
Workgroup. Opens the Workgroup Configuration window.
Shortcut for CallCenter > Workgroup Configuration.
IP Phone. Opens the IP Phone Configuration window.
Shortcut for PBX > AltiGen IP Phone Configuration.
AA. Opens the AA Configuration window.
Shortcut for System > AA Configuration.