User guide

Chapter 29: Tools and Applications
368 MAXCS ACC 6.7.1 Administration Manual
• PMC chip from host and DSP if T1/E1 board
You have the option of testing a single board or testing all boards at the same time.
CT-Bus Test Tool
The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP
cable and static noise problems.
1. Stop AltiGen Switching Services before running this utility.
2. Launch CT-Bus Test Tool from Start > All Programs > MAX Communication
Server ACC/ACM > Gateway Tools > CT-Bus Test Tool.
3. Click Start to begin the test.
4. At the end of the test, the utility provides pass or fail results.
Backup and Restore Utility
Note: The configuration backup option is turned on by default.
To back up or restore data, select either
• From MaxAdmin: Services > Utilities > System Data Management, or
• From the Windows Start menu: All Programs > MAX Communication Server
ACC/ACM > Utilities > ACC/ACM Backup and Restore.
Figure 167. System Data Management window
Note: The System Data Management window can only be accessed at the primary
MAXCS system; it is not available from a remote MaxAdmin client.