User guide

Chapter 2: System Requirements and Installation
24 MAXCS ACC 6.7.1 Administration Manual
The following licenses are available for Softswitch/HMCP Media Server/Gateway
systems only.
Licenses for 6.7 Softswitch/HMCP Media Server/Gateway Systems
HMCP Media Server License Available resources in the system
HMCP G.711/G.723/G.729
Voice Processing Resources
Available resources in the system
HMCP MeetMe Conference Available resources in the system
HMCP Supervision Available resources in the system
Softswitch Station License Per extension configuration
Softswitch ACC Agent Session
License
Per session
Softswitch ACM Agent Session
License
Per session
Softswitch ACM Agent
Migration License
Per ACC agent session
Gateway Per gateway
Preparation for Installation
Before you start installing MAXCS, you need the following:
• Windows Update – Make sure your server has the recommended Windows Service
Pack or Update.
• MAXCS ACC 6.7 CD – The MAXCS CD that contains the MAXCS 6.7 programs.
• MAXCS latest update – Check to see if there is an update available to the MAXCS
6.7 Release.
• System Key – The system key can be either a USB hardware security device that
must be attached to the server MaxCS is running on, or it can be a soft system key.
• You cannot use both a hardware device and the soft system key at the same
time.
• When using a soft system key, the MaxCS system must be a member of an
Active Directory domain.
• Software license key – A 20-digit key located on the front of the End User License
Agreement.
Installing MAX Communication Server
To install MAXCS, insert the MAXCS 6.7 CD ROM into the CD ROM drive of the server,
and follow the instructions on the install screens. At the third screen, select a setup type:
ACC Agent Seat
Per concurrent login (Single agent logged into multiple
WGs will only take one license)
Licenses for 6.7 Stand Alone Systems