User guide

Chapter 25: Enterprise VoIP Network Management
MAXCS ACC 6.7.1 Administration Manual 299
• For a single-system installation without a VoIP domain Master, this method is rec-
ommended: From MaxAdmin, select VoIP > Enterprise Network Management.
Enterprise Manager opens without a login dialog box.
• For multisite VoIP domain management, from the Windows Start menu, select All
Programs > MAX Communication Server ACC/ACM > Enterprise Manager.
(With this method you can log in to the VoIP domain Master from any member
system.)
User name Password
Login Domain Via
Server
DomainAdmin
(Logging in as
DomainAdmin gives you
rights to change the entire
Enterprise Manager
configuration.)
Default=22222. You can
change the password in
Enterprise Manager.
Note: This password is not
the same as the MaxAdmin
password.
Enter the domain
master’s IP address
Admin@domain master IP
address
(A Site Admin who logs into
the Domain Master in this way
has the same rights as
DomainAdmin.)
Enter MaxAdmin password
Enter the domain
master’s IP address
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.)
Enter the MaxAdmin
password for the member
server
Enter the member
server’s IP address
If your MAXCS system is using dynamic IP addressing, you will see the following
warning message when launching Enterprise Manager. Please check the Internet
Protocol (TCP/IP) Properties of your server NIC interface and assign a fixed IP address
to this server.
!