User guide

Chapter 19: Hunt Group Configuration
MAXCS ACC 6.7.1 Administration Manual 239
Figure 119. Huntgroup Configuration, Group Member tab
3. Select the extension number(s) in the Not Member list. Use Ctrl+click or
Shift+click to select several extensions.
4. Click Add to move them to the Member list.
Note: If the hunt group pilot extension is configured to Ring All Available Members,
the maximum number of members is 20. See “Setting Call Handling Options”
on page 244 for details.
To remove extension(s) from a hunt group,
1. Click the extension number(s) in the Member list.
2. Click Remove to move them to the Not Member list.
Setting Login Status for System Restart
Whenever the system is restarted, the administrator can use the list at the bottom of
the Group Member tab to:
• Keep Login Status – All group members retain their original login status for that
group prior to restart (default setting).
• All Login – All group members are automatically logged into the assigned group
after the system is restarted.
• All Logout – All group members are logged out of the group when the system is
restarted.
Setting Hunt Group Mail Management
The Mail Management settings define how voice messages are handled for a hunt group,
including how messages are announced and processed, and how much capacity is allot-
ted to message storage.
To work with mail management settings, click the Mail Management tab, and select
the hunt group number you want to work with from the Group List.