User guide

Check option 120
and enter the IP
address of your
MAXCS server in
the String value
field
Chapter 17: AltiGen IP Phone Configuration
MAXCS ACC 6.7.1 Administration Manual 223
7. Check option 120.
8. Enter the IP address of your MAXCS server in the String value field.
9. Click Apply and OK. The scope now shows option 120.
10. Right-click the scope option 120 and select Activate to activate the scope.
On the AltiGen IP Phone
The IP phone's System menu includes an item called Auto Discovery. The user can
select YES or NO for this menu item. The factory default is YES.
When you Upgrade Firmware
• When you upgrade from firmware that does not support Auto Discovery, Auto Dis-
covery will be disabled by default.
• When you upgrade from firmware that does support Auto Discovery, the Auto Dis-
covery setting will carry over.
• When the user erases the IP phone configuration by using **2 [enter] in the IP
phone menu, Auto Discovery will be enabled by default.