User guide

Chapter 14: Out Call Routing Configuration
MAXCS ACC 6.7.1 Administration Manual 175
3. On the Dialing Pattern tab of the Out Call Routing Configuration window, add
dialing pattern definition entries for the following prefixes:
• prefix = 0, length = 11
• prefix = 00, length = 14
• prefixes = 1-9, each length = 7
In the Route Priority field, use the list to select the En-Bloc route definition
(assigned in step 2).
The Dialing Pattern tab should look similar to the next figure.
With this configuration, the system will see that all digits have been collected and will
send digits to the CO, instead of waiting 7 seconds for the dialing to finish.