User guide

Chapter 14: Out Call Routing Configuration
MAXCS ACC 6.7.1 Administration Manual 169
Figure 95. Out Call Routing Configuration, Route Definition tab
Parameter Description
Route Index For identification purposes only.
Route Name Description of the route (maximum 40 characters).
Digit Manipulation
You can insert or delete digits from the dialed number. See con-
figuration samples to learn how to use digit manipulation in dif-
ferent situations.
Insert to Head: Insert a string of digits in front of the dialed
number.
Delete from Head: Remove a string of digits from the beginning
of the dialed number.
Member Trunks
Displays the trunks assigned to the selected route. The order in
which member trunks are added determines the order in which
the trunks are used by the system when making an outbound call
(the first trunk listed is used first, and so forth).
Not Member Displays all trunks that are not assigned to the selected route.
To create a route,
1. Click Add under the route definition list.
2. Type in a name and index number, and click OK.
3. To add trunks to the route, select trunks from the Not Member list and use the
button to move selected trunks to the Member Trunks list.
4. Use the Up and Down buttons to change the position of a trunk in the Member
Trunks list. This is the order in which trunks are accessed.