User guide

Chapter 12: Trunk Configuration
MAXCS ACC 6.7.1 Administration Manual 159
If the reading is worse than -18 dB, you should contact your CO to adjust the line
loss to the acceptable range.
Incoming Call Routing
To set incoming call routing for a trunk, select the trunk on the General tab, then click
the In Call Routing tab in the Trunk Configuration window. The trunk location shows
in the title bar.
Figure 91. Trunk Configuration, In Call Routing tab
Regular Trunk Calls
For each trunk—or using Apply to to apply the settings to multiple trunks—you can set
routing for the three time periods defined in the System Configuration window,
Business Hours tab (“Setting Business Hours” on page 49).
• During Business Hours
• Outside Business Hours