IP Phone User Manual
Table Of Contents

IP 720 User Manual 19
Network Settings
Registration from the Phone’s Menu
Under normal circumstances, the IP 720 phone registers itself 
automatically. However, if registration failed for some reason (for 
example, the server was not available), registration can be started again 
from the IP 720 phone’s menu: 
1. Press the Menu button.
2. Scroll to REGISTER.
3. Press the Enter button.
Emergency 
Gateway
System > 
Emergency GW 
Sets the IP phone’s emergency 
gateway IP address
Enable SIP 
Registration 
System > 
Enable SIP 
Registration
Enables SIP registration to the 
emergency gateway
Version 
Information
System > 
Version Info 
[Read only]
Displays the version number of the 
IP phone.
Setting Menu Path  Description
Enable DHCP Network > 
Enable DHCP
Sets whether Dynamic Host 
Configuration Protocol (DHCP) is 
being used by the IP phone to retrieve 
a new IP address upon boot up.
Local 
Address
Network > 
Local Address
Sets the IP phone’s local address; 
shows only if DHCP is disabled.
Network 
Mask
Network > 
Network Mask
Sets the IP phone’s network mask; 
shows only if DHCP is disabled.
Gateway Network > 
Gateway
Sets the default Gateway IP address.










