IP Phone User Manual

IP 720 User Manual 11
American Disabilities Act (ADA) Compliance
The hearing aid-compatible handset on the IP 720 phone is equipped with
a magnetic coupler, which meets the ADA HAC requirements.
The dialing pad also complies with ADA standards.
Redial button Redials a selected number
from the last16 numbers
dialed.
• Pressing Enter dials the number
displayed.
• Redials up to 32 digits.
• When a new call comes in, the
phone will exit this menu and go to
ring state. If in this menu for longer
than 20 seconds without any input,
the phone exits this menu.
Release
button
Releases a call from the
connected state. Deletes
characters entered on the
LCD. While onhook,
releases phone from an
active state.
Ring Tones Select from one of 14 ring
tones.
• Custom ring tones are not
supported.
Speaker
button
Enables use of speaker
phone.
Speed Dial
button
Quickly dials a selected
number from a list that has
been previously stored.
• These are speed dial numbers
configured by the system
administrator.
Transfer
button
Transfers an active call to
another number.
• This button cannot be used to
“flash” after being used to transfer
a call. To reconnect to a call after
using the Transfer button, use
thebutton or the Flash button.
Voice Mail
button
Enables access to voice
messages.
• The VM count that appears in the
LCD reflects new messages
(previously heard messages are not
included).