Warranty
PRODUCT OVERVIEW — ALTERED:NOZZLE DOME®
18.10.15
5
—
Warranty
If you are not satised with the product or if the product is defective,
take the product to the place of purchase. As a customer you must be
able to conrm the time of purchase by presenting a receipt or a copy of the
invoice for the delivery of the product in question. Altered products
are under warranty for two (2) years from the date of purchase. The warranty
applies only if the nozzle has been correctly installed and used.
The warranty does not cover damage from freezing or damage and functional
defects arising from impurities in the water. Nor does the warranty apply for
defects caused by improper cleaning (scrubbing or use of abrasive/corrosive
cleansers). Defects from normal product wear, faulty installation, incorrect use,
or failure to follow installation and service instructions shall not be compensated.
The warranty does not cover costs for third parties or for any costs other than for
the delivered product. Damages caused by stress corrosion as a result of water
conditions or the surrounding environment, or because of faulty installation, shall
not be included in product liability.
Cleaning and maintenance
Use a soft, damp cloth and a small amount of dishwashing liquid for daily
cleaning or when needed. Never use abrasives, steel wool, or harsh
cleansers (for example, for lime deposit removal or polishing, alkaline cleansers,
or cleansers containing alcohol). Rinse with water and dry/polish with a clean,
dry cloth. We also recommend that you remove the nozzle from the tap now
and then and clean it thoroughly. If there are lime deposits on the nozzle,
use a small amount of vinegar diluted with water to gently remove them.
Rinse afterward using only water.
Installation must be performed in accordance with all applicable local
regulations for building/construction and for water systems. If you are unsure,
contact a professional. In all water systems, it is very important to ensure that hot
and cold water maintain the correct temperatures and that the systems and its
components have been correctly installed.