User guide

34 Altera Corporation
Stratix II Professional Filtering Lab
4. Connect the power cable to the board and plug the other end into a
power outlet.
Figure 26. Connected Power Cable
5. To power-up the board, place SW1 (POWER switch) in the ON
position.
f For detailed instructions on connecting the cables and powering up the
Stratix II EP2S180 DSP development board, see the Stratix II EP2S180
DSP Development Board Reference Manual.
f For details on installing the USB-Blaster driver on your PC, see the
USB-Blaster Download Cable User Guide. The driver files are installed at
<quartus-install-dir>\drivers\usb-blaster.