User guide

Altera Corporation 15
Exercise 1: Review the Filtering Lab Design
Table 4 lists the parameters for the NCO_10MHz block that you
can set in the Implementation tab.
3. When you finish reviewing the parameter settings, click Cancel to
close the Parameterize - NCO Compiler MegaCore Function dialog
box.
4. Close the window to exit IP Toolbench.
Table 4. NCO_10MHz Compiler - Implementation Tab
Parameter Value
Under Device Family
Target Stratix II Professional
Under Outputs
Single Output Select
Under Multi-Channel NCO
Number of Channels 1
Under Multiplier-Based Architecture
Use Dedicated Multiplier(s) Select
Clock Cycles Per Output 1