User guide

4–2 Chapter 4: Development Board Setup
Factory Default Switch Settings
Stratix V GX FPGA Development Kit December 2014 Altera Corporation
User Guide
Figure 4–1 shows the switch locations and the default position of each switch on the
top side of the board.
Figure 4–1. Switch Locations and Default Settings on the Board Top
SW1
12345678
ON
ON = 0
OFF = 1
J8
1.8 V
1.5 V
1.2 V
Default: no jumper
installed for
2.5-V VCCIO
HSMB
VCCIO
User DIP
Switch