User guide

Related Information
• Configure the PHY IP Core on page 2-4
• Interlaken on page 2-76
• Gigabit Ethernet (GbE) and GbE with IEEE 1588v2 on page 2-97
• 10GBASE-R, 10GBASE-R with IEEE 1588v2, and 10GBASE-R with FEC Variants on page 2-110
• 10GBASE-KR PHY IP Core on page 2-125
• 1-Gigabit/10-Gigabit Ethernet (GbE) PHY IP Core on page 2-163
• PCI Express (PIPE) on page 2-228
• CPRI on page 2-268
• Using the "Basic (Enhanced PCS)" and "Basic with KR FEC" Configurations of Enhanced PCS on
page 2-279
• Using the Basic/Custom, Basic/Custom with Rate Match Configurations of Standard PCS on page
2-290
• Design Considerations for Data Rates Above 17.4 Gbps Using Arria 10 GT Channels on page 2-
313
• PMA Parameters on page 2-23
• Presets on page 2-19
• General and Datapath Parameters on page 2-19
• Enhanced PCS Ports on page 2-54
• Standard PCS Ports on page 2-68
• PMA Ports on page 2-49
Presets
You can select preset settings for the Transceiver Native PHY IP defined for each protocol. Use presets as
a starting point to specify parameters for your specific protocol or application.
To apply a preset to the Transceiver Native PHY IP, double-click on the preset name. When you apply a
preset, all relevant options and parameters are set in the current instance of the Transceiver Native PHY
IP. For example, selecting the Interlaken preset enables all parameters and ports that the Interlaken
protocol requires.
Selecting a preset does not prevent you from changing any parameter to meet the requirements of your
design. Any changes that you make are validated by the design rules for the transceiver configuration
rules you specified, not the selected preset.
Note:
Selecting a preset clear removes any prior selections user has made so far.
General and Datapath Parameters
You can customize your instance of the Transceiver Native PHY IP by specifying parameter values. In the
Parameter Editor, the parameters are organized in the following sections for each functional block and
feature:
• General and Datapath Options
• TX PMA
• RX PMA
• Enhanced PCS
UG-01143
2015.05.11
Presets
2-19
Implementing Protocols in Arria 10 Transceivers
Altera Corporation
Send Feedback