User guide

Parameter Range
Enable TX sync header error insertion On
Off
Table 2-92: Scrambler and Descrambler Parameters
Parameter Range
Enable TX scrambler (10GBASE-R /
Interlaken)
On
TX scrambler seed (10GBASE-R /
Interlaken)
0x03ffffffffffffff
Enable RX descrambler (10GBASE-R /
Interlaken)
On
Table 2-93: Block Sync Parameters
Parameter Range
Enable RX block synchronizer On
Table 2-94: Gearbox Parameters
Parameter Range
Enable TX data polarity inversion On
Off
Enable RX data polarity inversion On
Off
Table 2-95: Dynamic Reconfiguration Parameters
Parameter Range
Enable dynamic reconfiguration On
Off
Share reconfiguration interface On
Off
2-122
Native PHY IP Parameter Settings for 10GBASE-R, 10GBASE-R with IEEE...
UG-01143
2015.05.11
Altera Corporation
Implementing Protocols in Arria 10 Transceivers
Send Feedback