User guide

Parameter Value
Enable tx_pma_rxfound port (QPI) On/Off
Enable rx_seriallpbken port On/Off
Table 2-85: RX PMA Parameters
Parameter Value
Number of CDR reference Clocks 1 to 5
Selected CDR reference clock 0 to 4
Selected CDR reference clock frequency
Select legal range defined by the Quartus II
software
PPM detector threshold 100, 300, 500, 1000
CTLE adaptation mode manual
DFE adapatation mode disabled
Number of fixed dfe taps N/A
Enable rx_pma_clkout port On/Off
Enable rx_pma_div_clkout port On/Off
rx_pma_div_clkout division factor Disabled, 1, 2, 33, 40, 50, 66
Enable rx_pma_clkslip port On/Off
Enable rx_pma_qpipulldn port (QPI) On/Off
Enable rx_is_lockedtodata port On/Off
Enable rx_is_lockedtoref port On/Off
Enable rx_set_locktodata and rx_set_locktoref ports On/Off
Enable rx_seriallpbken port On/Off
Enable PRBS verifier control and status ports On/Off
Table 2-86: Standard PCS Parameters
Parameters Value
Standard PCS / PMA interface width 10
FPGA fabric / Standard TX PCS interface width 10
2-108
Native PHY IP Parameter Settings for GbE and GbE with IEEE 1588v2
UG-01143
2015.05.11
Altera Corporation
Implementing Protocols in Arria 10 Transceivers
Send Feedback