User guide

Parameter Value
Enable rx_enh_fifo_pempty port On / Off
Enable rx_enh_fifo_del port
(10GBASE-R)
Off
Enable rx_enh_fifo_insert port
(10GBASE-R)
Off
Enable rx_enh_fifo_rd_en port On
Enable rx_enh_fifo_align_val port
(Interlaken)
On / Off
Enable rx_enh_fifo_align_clr port
(Interlaken)
On
Table 2-72: Interlaken Frame Generator Parameters
Parameter Value
Enable Interlaken frame generator On
Frame generator metaframe length 5 to 8192 (Altera recommends a minimum metaframe length
of 128)
Enable frame generator burst control On
Enable tx_enh_frame port On
Enable tx_enh_frame_diag_status port On
Enable tx_enh_frame_burst_en port On
Table 2-73: Interlaken Frame Synchronizer Parameters
Parameter Value
Enable Interlaken frame synchronizer On
Frame synchronizer metaframe length 5 to 8192 (Altera recommends a minimum metaframe length
of 128)
Enable rx_enh_frame port On
Enable rx_enh_frame_lock port On / Off
2-94
Native PHY IP Parameter Settings for Interlaken
UG-01143
2015.05.11
Altera Corporation
Implementing Protocols in Arria 10 Transceivers
Send Feedback