User guide

Info–10 Additional InformationAdditional Information
How to Contact Altera
Altera Transceiver PHY IP Core March 2012 Altera Corporation
User Guide
How to Contact Altera
To locate the most up-to-date information about Altera products, refer to the
following table.
Typographic Conventions
The following table shows the typographic conventions this document uses.
November
2010
1.1
■ Corrected address offsets in Table 10–9 on page 10–11. These are byte offsets and should
be: 0x00, 0x04, 0x08, 0x0C, 0x10, not 0x00, 0x01, 0x02, 0x03, 0x04.
■ Corrected base address for transceiver reconfiguration control and status registers
in
Table 10–9 on page 10–11. It should be 0x420, not 0x400.
■ Corrected byte offsets in Table 7–21 on page 7–21 and Table 6–12 on page 6–14. The base
address is 0x200. The offsets are 0x000–0x018.
July 2010 1.0
■ Initial release.
Date Version Changes Made SPR
Contact
(1)
Contact Method Address
Technical support Website www.altera.com/support
Technical training
Website www.altera.com/training
Email [e-mail]
Product literature Website www.altera.com/literature
Nontechnical support (general) Email [e-mail]
(software licensing) Email [e-mail]
Note to Table:
(1) You can also contact your local Altera sales office or sales representative.
Visual Cue Meaning
Bold Type wit h Init ial Capital
Letters
Indicate command names, dialog box titles, dialog box options, and other GUI
labels. For example, Save As dialog box. For GUI elements, capitalization matches
the GUI.
bold type
Indicates directory names, project names, disk drive names, file names, file name
extensions, software utility names, and GUI labels. For example, \qdesigns
directory, D: drive, and chiptrip.gdf file.
Italic Type with Initial Capital Letters Indicate document titles. For example, Stratix IV Design Guidelines.
italic type
Indicates variables. For example, n + 1.
Variable names are enclosed in angle brackets (< >). For example, <file name> and
<project name>.pof file.
Initial Capital Letters
Indicate keyboard keys and menu names. For example, the Delete key and the
Options menu.
“Subheading Title”
Quotation marks indicate references to sections in a document and titles of
Quartus II Help topics. For example, “Typographic Conventions.”