Specifications

Chapter 1: Nios II Hardware Development 1–23
Creating the Design Example
May 2011 Altera Corporation Nios II Hardware Development Tutorial
5. Click the IRQ value for the sys_clk_timer component to select it.
6. Type
1 and press Enter to assign a new IRQ value.
Figure 1–12 shows the Qsys System Contents tab with the complete system.
Generate the Qsys System
You are now ready to generate the Qsys system. Perform the following steps:
1. Click the Generation tab.
2. Select None in both the Create simulation model and Create testbench Qsys
system lists. Because this tutorial does not cover the hardware simulation flow,
you can select these settings to shorten generation time.
3. Click Generate. The Save changes? dialog box appears, prompting you to save
your design.
Figure 1–12. System Contents Tab with Complete System