Specifications

Note: Quotation marks are not required.
Table 13-8: Memory Initialization Information - Assign with set_module_assignment Command
Memory Initialization
Name
Type Default Meaning
HAS_BYTE_LANE boolean 0 Create a memory initialization file for each
byte.
IS_FLASH boolean 0 Component is a flash device.
IS_EPCS boolean 0 If IS_FLASH and IS_EPCS are both 1,
component is an EPCS flash device. If IS_
FLASH is 1 and IS_EPCS is 0, the component is
a CFI flash device. If IS_EPCS is 1, IS_FLASH
must also be 1.
GENERATE_HEX boolean 0 Create an Intel hexadecimal file (.hex).
GENERATE_DAT_SYM boolean 0 Create a .dat and a .sym file.
GENERATE_FLASH boolean 0 Create a Motorola S-record File (.flash).
INCLUDE_WARNING_
MSG
string empty string Display a warning message when creating
memory initialization files.
MEM_INIT_FILENAME string Module
instance
name
Name of the memory initialization file,
without any file type suffix.
MEM_INIT_DATA_
WIDTH
32-bit
integer
none
(mandatory)
Width of memory initialization file in bits.
May be different than the slave port data
width.
Document Revision History for Publishing Component Information to
Embedded Software
Date Version Changes
May 2015 2015.05.14
• Maintenance release.
• Renamed to Nios II Classic.
May 2011 11.0.0 Introduction of Qsys system integration tool
February 2011 10.1.0 Removed “Referenced Documents” section.
July 2010 10.0.0 Maintenance release.
NII5V2
2015.05.14
Document Revision History for Publishing Component Information to...
13-9
Publishing Component Information to Embedded Software
Altera Corporation
Send Feedback