Specifications

Publishing Component Information to
Embedded Software
13
2015.05.14
NII5V2
Subscribe
Send Feedback
This document describes how to publish hardware component information for embedded software tools.
You can publish component information for use by software, such as a C compiler and a board support
package (BSP) generator. Information used by a C compiler might be a set of #define statements that
describe some aspect of a component. Information used by a BSP generator might be the identification of
memory components, so that the BSP generator can create a linker script.
Embedded Component Information Flow
Embedded Component Information Flow Diagram
Embedded Component Information Flow
Hardware
Component
_hw.tcl
System Integration Tool
(Qsys or
SOPC Builder)
.sopcinfo
Embedded
Software Tool
*.sopc
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134