Specifications

Programming the Zip File to Flash
For your program to access files in the zip file subsystem, you must first program the zip data to flash. As
part of the project build process, the Nios II development tools create a Motorola S-record file (.flash) that
includes the data for the zip file system.
You then use the Nios II Flash Programmer to program the zip file system data to flash memory on the
board.
Related Information
Nios II Flash Programmer User Guide
For more information about programming flash.
Document Revision History for Read-Only Zip File System
Date Version Changes
May 2015 2015.05.14
• Maintenance release.
• Renamed to Nios II Classic.
May 2011 11.0.0 No change
February 2011 10.1.0 Removed "Referenced Documents" section.
July 2010 10.0.0 Maintenance release.
November 2009 9.1.0 Maintenance release.
March 2009 9.0.0
• Reorganized and updated information and terminology to clarify
role of Nios II Software Build Tools.
• Corrected minor typographical errors.
May 2008 8.0.0 Maintenance release.
October 2007 7.2.0 Maintenance release.
May 2007 7.1.0
• Added table of contents to "Introduction" section.
• Added Referenced Documents section.
March 2007 7.0.0 Maintenance release.
November 2006 6.1.0 Maintenance release.
May 2006 6.0.0 Maintenance release.
October 2005 5.1.0 Maintenance release.
May 2005 5.0.0 Maintenance release.
May 2004 1.0 Initial release.
12-2
Programming the Zip File to Flash
NII5V2
2015.05.14
Altera Corporation
Read-Only Zip File System
Send Feedback