Specifications

Instantiating the Nios II Processor
4
2015.04.02
NII51004
Subscribe
Send Feedback
This chapter describes the Nios
®
II Processor parameter editor in Qsys. The Nios II Processor parameter
editor allows you to specify the processor features for a particular Nios II hardware system. This chapter
covers the features of the Nios II processor that you can configure with the Nios II Processor parameter
editor; it is not a user guide for creating complete Nios II processor systems.
To get started designing custom Nios II systems, refer to the Nios II Hardware Development Tutorial.
Development kits for Altera devices, available on the All Development Kits page of the Altera website, also
provide ready-made hardware design examples that demonstrate different configurations of the Nios II
processor.
Related Information
• All Development Kits
• Nios II Hardware Development Tutorial
To get started designing custom Nios II systems, refer to the Nios II Hardware Development Tutorial.
Core Nios II Tab
The Core Nios II tab presents the main settings for configuring the Nios II processor.
Table 4-1: Core Nios II Tab Parameters
Name Description
Select a Nios II Core
Nios II Core Refer to the "Core Selection" section.
Hardware Arithmetic Operation
Hardware multiplication type
Refer to the "Multiply and Divide Settings" section.
Hardware divide
Reset Vector
Reset vector memory
Refer to the "Reset Vector" section.Reset vector offset
Reset vector
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134