Specifications

Altera Corporation 1–37
October 2007
Nios II Hardware Development Tutorial Creating the Example Design
Perform the following steps:
1. Right-click count_binary_0 and click System Library Properties.
The Properties dialog box for count_binary_0_syslib opens.
2. Click the System Library page. The System Library page contains
all settings related to how the program interacts with the underlying
hardware. Therefore, the settings here reflect names you specified
when creating the Nios II hardware in section “Define the System in
SOPC Builder” on page 1–15.
3. Change the following settings to reduce the size of the compiled
executable (see Figure 1–20).
a. Turn on Program never exits.
b. Turn off Support C++.
c. Turn off Clean exit (flush buffers).
d. Turn on Small C library.
f For further details on the system library see the Nios II
Software Developer's Handbook.