Specifications

Altera Corporation 1–27
October 2007
Nios II Hardware Development Tutorial Creating the Example Design
1. Click the System Generation tab.
2. Turn off Simulation. Create simulator project files., which saves
time because this tutorial does not cover the hardware simulation
flow.
3. Click Generate. The system generation process begins.
The generation process can take several minutes. When it completes,
the System Generation tab displays a message "Info: System
generation was successful." (see Figure 1–14).
Figure 1–14. Successful System Generation
4. Click Exit to return to the Quartus II software.
Congratulations! You have finished creating the Nios II processor system.
You are ready to integrate the system into the Quartus II hardware project
and use the Nios II IDE to develop software.