Specifications

Chapter 1: Using the NicheStack TCP/IP Stack 1–15
Software Development Flow
June 2011 Altera Corporation Using the NicheStack TCP/IP Stack - Nios II Edition Tutorial
Figure 1–9 shows the corresponding output that appears in the Nios II Console view.
To test the functionality of the Nios II Simple Socket Server, enter the following
commands in the telnet session:
1. Type
<n> r, where <n> is a number from one through nine, to change the blink rate
of the LED on your board.
2. Repeat step 1 several times, varying the number, to see the pulse rate change.
3. Type
Q r to terminate the test. The socket connection on the development board
terminates and the telnet command exits.
Figure 1–9. Nios II Console Output During Telnet Session