Specifications
I/O Vertical Migration for Cyclone V Devices
Figure 5-1: Vertical Migration Capability Across Cyclone V Device Packages and Densities—Preliminary
The arrows indicate the vertical migration paths. The devices included in each vertical migration path are
shaded. You can also migrate your design across device densities in the same package option if the devices
have the same dedicated pins, configuration pins, and power pins.
Variant
Member
Code
Package
M301 M383 M484 F256 U324 U484 F484 U672 F672 F896 F1152
Cyclone V E
A2
A4
A5
A7
A9
Cyclone V GX
C3
C4
C5
C7
C9
Cyclone V GT
D5
D7
D9
Cyclone V SE
A2
A4
A5
A6
Cyclone V SX
C2
C4
C5
C6
Cyclone V ST
D5
D6
You can achieve the vertical migration shaded in red if you use only up to 175 GPIOs. This migration path
is not shown in the Quartus II software Pin Migration View.
To verify the pin migration compatibility, use the Pin Migration View window in the Quartus II
software Pin Planner.
Note:
Related Information
• Verifying Pin Migration Compatibility on page 5-5
• I/O Management chapter, Quartus II Handbook
Provides more information about vertical I/O migrations.
I/O Features in Cyclone V Devices
Altera Corporation
Send Feedback
CV-52005
I/O Vertical Migration for Cyclone V Devices
5-4
2013.06.21