Specifications

Steps for Implementing a Secure Configuration Flow Page 17
Using the Design Security Features in Altera FPGAsJune 2012 Altera Corporation
6. On the File menu, point to Create/Update and click Create JAM, SVF, or ISC File.
The Create JAM, SVF, or ISC File dialog box appears (Figure 16).
7. Select the required file format (.jam), for all the .ekp files in the File format field.
8. Type the file name in the File name field, or browse to and select the file.
9. Click OK to generate the .jam file.
10. On the Tools menu, click Programmer Options. The Programmer Options dialog
box appears.
1 You must turn off Configure volatile design security key to generate a
non-volatile .svf file of the .ekp file.
11. Click OK.
Figure 16. Multi-Device Key Programming: .jam File Generation
Example of two
Stratix IV devices
in one JTAG
chain
Select the
.jam file format