Specifications

Page 14 Steps for Implementing a Secure Configuration Flow
Using the Design Security Features in Altera FPGAs June 2012 Altera Corporation
14. On the File menu, point to Create/Update and click Create JAM, SVF, or ISC File.
The Create JAM, SVF or ISC File dialog box appears (Figure 13).
15. Select the file format required (JEDEC STAPL Format [.jam]), for the .ekp file in
the File format field.
16. Type the file name in the File name field, or browse to and select the file.
17. Click OK to generate the .jam file.
18. On the Tools menu, click Programmer Options. The Programmer Options dialog
box appears (Figure 14).
1 For non-volatile secure design feature, you must turn off the Configure volatile
design security key option to generate a non-volatile .svf file of the .ekp file
(Figure 14).
Figure 13. Create .jam File from Single-Device .ekp File
List the file
name for the
.jam file
Select the
.jam file format
Figure 14. Programmer Options Dialog Box
Option for volatile o
r
non-volatile
key programming