Specifications

Steps for Implementing a Secure Configuration Flow Page 13
Using the Design Security Features in Altera FPGAsJune 2012 Altera Corporation
9. On the Tools menu, click Programmer. The Programmer dialog box appears
(Figure 12).
10. In the Mode list, select JTAG as the programming mode.
11. Click Hardware Setup. The Hardware Setup dialog box appears.
a. In the currently selected hardware list, select EthernetBlaster as the
programming hardware.
b. Click Done.
12. Click Add File. The Select Programmer File dialog box appears.
a. Type <filename>.ekp in the File name field.
b. Click Open.
13. Highlight the .ekp file you added and click Program/Configure.
Figure 12. Programmer Dialog Box