User guide

SFSU - Embedded Systems Tutorial Nano- Electronics & Computing Research Lab
76
Step 7: Go to the “Connections” column and connect the following ports:
f. For all the components connect the clock input and outputs to clock_50
g. For all the components connect the Avalon memory mapped slave to the On-chip
memory AMMS.
h. Open the Nios II processor named CPU and change the reset vector and
exception vectors to onchip_memory2
Step 8: For assignment of base addresses in SOPC Builder:
Click on “Auto assign base addresses” on the main menu bar and “Auto assign IRQ’s” as
shown in figure below:
The complete SOPC Builder system is shown below: