User guide

SFSU - Embedded Systems Tutorial Nano- Electronics & Computing Research Lab
6
•JTAG and AS mode configuration
•EPCS64 serial configuration device
•On-board USB Blaster circuitry
Memory devices:
•128MB (32Mx32bit) SDRAM
•2MB (1Mx16) SRAM
•8MB (4Mx16) Flash with 8-bit mode
•32Kb EEPROM
SD Card socket:
•Provides SPI and 4-bit SD mode for SD Card access
Connectors:
•Two Ethernet 10/100/1000 Mbps ports
•High Speed Mezzanine Card (HSMC)
•Configurable I/O standards (voltage levels:3.3/2.5/1.8/1.5V)
•USB type A and B
Provide host and device controllers compliant with USB 2.0
Support data transfer at full-speed and low-speed
PC driver available
•40-pin expansion port
Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)
•VGA-out connector
VGA DAC (high speed triple DACs)
•DB9 serial connector for RS-232 port with flow control
•PS/2 mouse/keyboard
Clock:
•Three 50MHz oscillator clock inputs
•SMA connectors (external clock input/output)
Audio:
•24-bit encoder/decoder (CODEC)
•Line-in, line-out, and microphone-in jacks
Display:
•16x2 LCD module
Switches and indicators:
•18 slide switches and 4 push-buttons switches