User guide

SFSU - Embedded Systems Tutorial Nano- Electronics & Computing Research Lab
25
c) Click “OK”
d) A new Verilog file will open. An asterisk will appear near the file name
whenever unsaved changes have been made.
~ This tutorial focuses on Verilog (a hardware description language), In order to
program the Altera DE2-115
Step 4: Copy the Verilog Code from the file Binary_Adder.txt file into Quartus II
Note: Binary_Adder.txt is located in the Codes folder
Step 5: You will use the DE2-115 manual to determine ports and PIN assignments.
Assignments->assignment editor (Ctrl+Shift+A) set all components to their appropriate locations
and voltage