User guide

SFSU - Embedded Systems Tutorial Nano- Electronics & Computing Research Lab

a) Design Flow- Introduction (Page No. 11), Graphical User Interface Design

Flow (Page No. 12)

b) Design Entry (Page No. 29) Introduction, Creating a Project(Page No. 30),

Creating a Design(Page No. 31), later this document can be used for a specific

method of design entry (like Verilog, Block Diagram, VHDL, etc.)

c) Programming & Configuration (Page No. 93) Introduction, Creating and

Using Programming Files

2) Using Verilog for Quartus II Design:

<system cd>\DE2_115_tutorials\tut_quartus_intro_verilog.pdf

• focus: This tutorial guides through the simulation process so that the project can

be implemented without needing access to the DE2-115.(familiar with quartus and Verilog)

(PG No 1-21)

3) Quartus II Handbook: http://www.altera.com/literature/hb/qts/quartusii_handbook.pdf

• NOTE: This resource is in depth and is only necessary to briefly overview the

material in order to know where information can be found on an as needed basis.