User guide

Appendix A: Programming the Flash Device A–5
Programming the Flash Device
September 2010 Altera Corporation Cyclone III FPGA Development Kit User Guide
8. Click Start to download the selected configuration file to the FPGA (Figure A–2).
The FPGA is configured when the progress bar reaches 100%, after which it is
ready to access and program the flash device.
9. Click Auto Detect. The EP3C120 device and a child CFI_512MB device appear in
the list of devices to be programmed.
10. Double-click the <File><none> field of the CFI_512MB row. The Select New
Programming File dialog box appears. Select the desired .pof, in this example the
<output_file>.pof flash file you created earlier, and click Open.
Figure A–2. PFL Programming