User guide

3–2 Altera Corporation
Cyclone III FPGA Starter Kit User Guide July 2010
LEDs and Buttons
You can locate the source for the example design in the <kit
path>\examples\cycloneIII_3c25_starter_board_standard directory.
1 To launch the control panel user interface, run the
control_panel.exe program found in the <kit
path>\demos\control_panel directory (Figure 3–1).
Figure 3–1. Control Panel Window
LEDs and
Buttons
Illuminating LEDs
To illuminate an LED, follow these steps:
1. The LED & Buttons tab should be visible when the application runs.
If it is not visible, click the LED & Buttons tab (Figure 3–2).
2. Click on LEDs to individually turn on the LEDs.