Specifications

Calibrators
6
Fluke 789
ProcessMeter
• 24V Loop Power Supply
• HART Mode Setting with Loop Power adds
250 Ohm Resistor
• 0-100% mA Span Check Buttons to Toggle between
4 and 20 mA
• DMM Designed to Meet 1000 Volt
IEC 1010 CAT III Standards
• Precision 1000V, 440 mA True-RMS Digital Multimeter
• Frequency Measurement to 20 kHz
• 20 mA DC Current Source / Loop Calibrator
/Simulator
Save Time and Cost!
Process users save time and equipment costs by incorporating
a meter and a loop calibrator into one instrument. By
combining two instruments into one, calibration savings
occur as there is only one instrument to calibrate.
Fluke 707
mA Loop Calibrators
• Intrinsically Safe (707EX)
- ATEX Certification (Ex II 2 Eex Ia IIC T4 Zones 1 and 2
- FM Certification N.I. Class I Div 2 Areas Group A-D
• Simultaneous mA and % Readout
• 0.001 mA Resolution for mA Source, Simulate,
and Measure
• Selectable Slow Ramp, Fast Ramp, and Step Ramp to
Provide Smooth Outputs for Valve Slewing and Loop
Functional Tests
• 24V Internal Loop Supply to Power and Read a Transmitter
Easy Calibration Troubleshooting!
Spend your valuable time diagnosing the mA loop, not figuring
out the calibrator. The 707 and 707EX (intrinsically safe) loop
calibrators provide you quick, easy calibration troubleshooting of
your process loop.
Fluke 715
mA/mV/V Process Calibrator
• Accuracy ±0.02%
• 0.001 mA Resolution
• Sources and Reads 0–24 mA
• Sources and Reads 0–10 V or 0–100 mV
• Simulate 2-Wire Transmitters
One Instrument... Two Functions!
Combines volt and mA source and read functions into one
instrument, reducing acquisition and maintenance costs.
Altek 134-2
mA Calibrator
• Sources and Reads mA
• Simulate 2-wire Transmitters
• Powers and Measures 2-wire Transmitters
• Quik-Chek
®
Push Buttons Output 4.00 and 20.00 mA
and Any Third Point
• Accurate to 0.03 mA from 4.00 to 20.00 mA
• Optional Carrying Case with Belt Clip
Easy to carry and use!
Small sized to go everywhere. Just the right calibrator to
throw in the toolbox or clip on your belt. Affordable enough
for every tech to carry one!
Order # Description Price
JS715 mA/mV/V Process Calibrator $ 795
Order # Description Price
JS789E Fluke 789 ProcessMeter $ 695
Order # Description Price
JS707E Fluke 707 mA Loop Calibrator $ 595
JS707EX Fluke 707EX mA Loop Calibrator (intrinsically safe) $ 875
Order # Description Price
JS3331E-2 Altek 134-2 Pocketcal™ mA Calibrator $ 332
JS3331E-CS Carrying Case for Altek 134-2 $ 17
Meriam MFC 4100
HART® Communicator
• Update Device Comm Files Via the Internet
• Upload / Download Configurations
• Quick Menu Access Key
• HART
®
Menu Home Key
• Full Alpha-numeric Keypad
• Dedicated Text Edit Keys
The MFC 4100 is designed to optimize end user
convenience and usability. Easy downloads keep this
HART communicator current for all of your HART
devices within the plant.
Order # Description Price
JSMFC4100 Communicator $ 2,750
JSMFC4101 Communicator with Documenting Capability $ 2,910
JSMFC4102 Communicator with Intrinsically Safe Rating $ 2,888
JSMFC4103 Communicator with Documenting Capability
& Intrinsically Safe rating $ 2,999
Emerson Process Management
375 Field Communicator
• Most Complete Communicator Available–
the New Universal Standard
• Intrinsically Safe
• Supports all HART® and Foundation Fieldbus Devices
• Easy Upgrade Over the Internet
• Interfaces with AMS PC Suite Software
• Emerson 375 Replaces the Emerson 275
The 375 is the only communicator you will need to
configure, test, and diagnose your HART
®
and
Foundation Fieldbus devices. You will be able to
communicate with any device, by any manufacturer.
Order # Description Price
JS375HR1EKLU HART, I/S, Easy Upgrade $3,453
JS375HR1EKLUB HART, I/S, Easy Upgrade, Spare Battery $3,742
JS375HR1EKLUC HART, I/S, Easy Upgrade, Expansion Module $3,856
JS375HR1EKLUBC HART, I/S, Easy Upgrade, Spare Battery, Expansion Module $4,143
JS375FR1EKLU HART and Fieldbus, I/S, Easy Upgrade $4,401
JS375FR1EKLUBC HART and Fieldbus, I/S, Easy Upgrade, Spare Battery,
Expansion Module $4,802