Specifications

Calibrators
5
Altek 934
mA/V Calibrator
• Monitor Cal Input and Output with Dual
5 Digit Display
• Simultaneous Source and read to 0.001 mA,
0.001V and 0.01 mV
• ±0.012% Accuracy – Accurate to 0.005 mA,
0.004V and 0.10 mV
• Scalable Display
• 24 VDC Loop Power
• Carrying Case Included
The highest accuracy process calibrator!
Calibrate mA and VDC intruments with laboratory accuracy.
Unbeatable specs and dual displays to monitor any
combination of mA and V inputs and outputs.
Transmation 1045
DC Process Signal Calibrator
• Input and Output Functions
• 2-Wire Transmitter Simulation
• Ruggidized Metal Housing for Use in the Field
• FM Certified Non-incendive for Class I,
Division 2, Groups A, B, C, and D
Excellent general purpose DC calibrator
For mA, mV, and voltage. Input and output circuits are both active
at all times, and a toggle switch selects which signal is displayed
on the calibrator. For calibrating 2-wire transmitters, the 1045E
will power the loop while measuring transmitter output.
Transmation
Checkmate™ 100
mA Calibrator
• Recall and Source Up to 3 Points in Every Range
• Fast, Easy Set Up
• Accuracy: ±0.05% FS +1 LSD
• Power and Measure 2-Wire Transmitters:
0-24.00 mA Output current
• Includes Carrying Case and Leads
The mA calibrator for the technician on the go. Easily
set any 0-24mA value with intuitive UP and DOWN
pushbuttons. Store up to 3 points in every range, even
when the unit is turned off.
Altek 434
High Accuracy mA Calibrator
• Time Saving Automatic Features Auto-Chek™ Step,
Ramp and Valve-Chek™
• Accurate to 0.005 mA from 4.000 to 20.000 mA
• Continuous Operation for a Full Week without
Battery Changes – Over 44 hours at 12 mA
• Sources mA and Simulates Transmitters
• Built-In 24V Loop Supply and 250Ω Resistor
for HART® Compatibility
• Read to 99.99 VDC and 52.000 mA
Better calibrations quickly and accurately.
No handheld mA calibrator has better accuracy or is as
easy to use. Extra long battery life keeps you in the field
calibrating.
Altek 942
Frequency Calibrator
• Match Your Signal
– Sine & Square Waves to 0.001% of Rdg
• Built-in Frequency Counter Reads in Hz/kHz
and CPM/CPH
• Counts-per-minute (CPM) and Counts-per-hour (CPH)
Ranges
• Simple Totalizer Calibration
– Output & Count Pulses for Preset time
• Optional Dry Contact Module (C-41) Adapts the 942 to
Simulate and Measure Flowmeter Contacts and Relays
Handheld calibrator with the accuracy of
an 8-digit counter!
Calibrate flowmeters, turbines, vortex shedders and all the
frequency instruments plantwide.
Order # Description Price
JS1045E-01 DC Proocess Signal Calibrator for 115V $ 1,446
JS1045E-02 DC Proocess Signal Calibrator for 115V or 220V $ 1,465
JS500143-003 Test Leads $ 36
JS759550-010 Replacement Batteries for 1045E $ 56
Order # Description Price
JSALTEK942 Frequency Calibrator with Totalizer $ 836
JS942-BNC Frequency Calibrator with Totalizer and BNC Connector $ 878
JS5501E Altek Model C-41 Dry Contact Module $ 302
JS21037E-120 AC Adapter, 120 VAC, 50/60 Hz $ 33
Order # Description Price
JS21037E mA/V Calibrator $ 1,318
JS21037E-120 120V Battery Eliminator $ 33
Order # Description Price
JS23400E Transmation Checkmate 100 mA Calibrator $ 441
Order # Description Price
JS434E Altek 434 High Accuracy mA Calibrator $ 584
Altek 334A
mA Calibrator
• Use One Hand to Flip the Quik-Chek® Switch
for Instant 4.00 and 20.00 mA
• Sources, Reads and Simulates mA
• Reads to 99.99 VDC and 52.00 mA
• Sources 0.00 to 24.00 mA or
-25.0 to +125.0 % of 4 to 20 mA Span
• Accurate to 0.02 mA from 4.00 to 20.00 mA
The world’s best selling mA calibrator!
Easy one handed operation. Concentrate on the calibration,
not on using the calibrator. Faster calibrations and long
battery life to get more work done every day.
Order # Description Price
JS4353E Altek 334A Calibrator, 4 to 20 mA $ 461
JS3330T Dual Soft Carrying Case $ 24