User manual

9 | P a g e
© Copyright 2012 Altech UEC (Pty) Ltd
2 FRONT PANEL
1
STANDBY Button
Switches the decoder between ON and STANDBY modes.
2
Smartcard Slot
Behind the Front Panel Cover.
3
LEDs
Bi-colour
RED/GREEN
AMBER GREEN
Indicates response to remote control commands and/or error mode
RED = Decoder in standby mode or an error condition has occurred.
GREEN = Normal operations.
Flashes = when there are incoming messages
Flashes = when RCU command received.
4
Front Panel Release
Opens the front panel when pulled.
5
Front Panel
LED Display
Displays the time (Standby Mode) or displays the selected
TV channel. Front panel with display “REC” if there is a recording
in progress
6
6
VOL<
Decreases the volume level.
7
VOL˃
Increases the volume level.
8
8
CH˃
Changes to the next available channel.
9
CH˃
Changes to the previous available channel.
10
OK
Accepts the selection.
11
RESET
Reboots the decoder, i.e. if decoder freezes etc.
1 2 3 4 5 6 7 8 9 10 11