Manual

4.3 Connect the antenna

Connect the antenna lead to the ANTENNA IN connection on the rear of the

Set Top Box.

3.4 Connect the power

3.4.1 Plug the power lead of the receiver into the mains.

3.4.2 Connect the power to your monitor.

3.4.3 Link the power to the amplifier; you are now ready to get started.

REBOOT THE RECEIVER

Resetting to factory default can be useful if you have change some settings

and lost some functions. Resetting takes the receiver back to its original

configuration and you will lose all personalized functions (favorites,

parental lock, etc…). To avoid resetting the receiver accidentally, you are

required to enter a PIN CODE to authorize reset as follows:

• Menu / Settings / Factory Reset

• Press the red button to confirm.

• Enter your PIN CODE (4 digits – factory code is 0000).

• Wait a few seconds