Users Manual

ManualsBrandsAltec ManualsAudio Equipment24inch Sound Bar with Lights

Product Overview

1. : Under Bluetooth mode, shortly press this button to Play/Pause music playback. Long press this button to disconnect the

Bluetooth connection when the devices has successfully paired with speaker. Under RCA / HDMI / Optical mode, short press this

button to mute or re-mute the sound.

2. : Short press for previous section. Long press to decrease volume.

3. / Mode : Long press to switch the unit between on and standby mode. Shortly press to select your preferred source.

4. : Press for next section. Long press to increase volume.

5. Long Light Strips

6. The White Strobes

7. Ring Light Strips

8. Remote Control Receiver

9. Status LED indication

• Red indicator: in STANDBY mode

• Yellow indicator: in Audio L/R mode

• White indicator flashes: in HDMI mode

• White indicator: in OPTICAL mode

• Blue indicator: in Bluetooth mode.

• Blue indicator flashes: in Bluetooth pairing mode.

10. 5V out Port (For connecting the LED strip lights kit only)

11. Audio L/R Socket

12. Optical Port

13. DC Power Socket

14. HDMI Port

Summary of content (4 pages)

PAGE 1
Product Overview 1. : Under Bluetooth mode, shortly press this button to Play/Pause music playback. Long press this button to disconnect the Bluetooth connection when the devices has successfully paired with speaker. Under RCA / HDMI / Optical mode, short press this button to mute or re-mute the sound. 2. : Short press for previous section. Long press to decrease volume. 3. / Mode : Long press to switch the unit between on and standby mode. Shortly press to select your preferred source. 4.
PAGE 2
Remote Control 1. : Switch the unit between on and standby mode. 2. BT/AUX: Switch the mode between Bluetooth and RCA mode. 3. HDMI/OPTO: Switch the mode between HDMI and Optical mode. 4. : In Bluetooth mode, skip to the previous audio file. (Note: This function is not available in RCA/HDM/OPTICALI mode.) 5. MUSIC/MOVIE: Sound effect-Music mode/Movie mode. 6. : In Bluetooth mode, skip to the previous/next audio file. (Note: This function is not available in RCA/HDM/OPTICALI mode.) 7.
PAGE 3
MUSIC 4: The purple light flashes quickly after 3 times (only music control mode, suitable for DJ music). When there is no music, the LED light does not light. Operation Getting Started • When you first connect the main unit to the mains socket via the AC adaptor, the main unit will be in Standby mode. • Long press the POWER button on the unit or on the remote control to switch the unit ON. Pairing Bluetooth Enabled Devices 1. Switching to Bluetooth mode.
PAGE 4
Technical data Product Type Function Power output Product dimension（L×W×H) Power supply Bluetooth Version Soundbar Bluetooth, RCA, HDMI, Optical 40W 600×92×72MM DC 18V 2.3A V5.0 FAQS If you encounter problems when using this unit, check the following points before requesting service. Problem Solution No power Ensure that the AC adaptor of the apparatus is properly connected. Press the POWER button Remote control does not work to turn the unit on.