User manual

13
support.alteclansing.com
• Wait for the Status LED on to start flashing purple. This will take
approximately 20-30 seconds.
• Press the “Wi-Fi Connect” button on the back of your device.
The LED will begin to flash orange.
• Go to your computer’s* Wi-Fi settings and select “inAir-Setup”. You will
be temporarily disconnected from your home network.
• The Status LED will change to solid blue. This confirms that you have
connected to the “inAir-Setup” successfully.
*Mac/PC computer, iPad, iPhone, or iPod touch.
2. Connect your devices continued...
Browser setup continued...