Specifications

3. Technical Data
Bus system: ISA-Bus, 16-bit
Dimensions: 180 mm x 100 mm. Component height above
printed circuit board is 11.8 mm.
Features: PC Card Drive with standard PC Card BIOS extension.
2 x card slots type II or 1 x card slot type III. Slots are
accessed using either drivers built into the operating
system, CardWare
TM
Software from AWARD or the altec
BIOS extension.
Operating systems: Supports DOS, OS/2, Windows 3.x, Windows 95, Windows
NT.
BIOS extension: 8 kByte, with boot software and altec setup program,
configurable per jumper for addresses from C000h to FE00h
in 8 kByte steps.
Bootability: Bootable without restriction under DOS and Windows;
Windows 95 and OS/2 bootable in HDD format without
media swap recognition.
(please ask about custom drivers).
Software: CardWare
TM
software from AWARD which supports both
memory cards and I/O cards (Socket Services und Card
Services).
Power requirements: 5V 150 mA (without PC Card), max. 1A per card slot. 12V is
only required for memory cards which need 12V write
voltage.
Temperature range: Operation: 0°C to +70°C
Moisture: 0 to 90% (non-condensing)
Storage: -40°C to +75°C
Moisture: 0 to 90% (non-condensing)
Firmware update: The altec BIOS extension firmware can be updated by
software.