User guide

if( iBytes != 16)
{
iReturnCode = 3;
} // if( iBytes != 16)
} // else // if(pFile == NULL)
}else // if( iBytes != 16)
} // else // if(pFile == NULL)
}
else // if (argc == 2)
{
iReturnCode = 1;
}//else // if (argc == 2)
return iReturnCode;
}
3.20 Connecting and using several IQ CopyStations
The PowerSoftware allows you to control up 32 IQ CopyStations from a single PC. Slots for all of
the connected CopyStations are shown in the status panel on the right of the main window. Jobs
are automatically distributed among all of the connected devices. If you connect up a new IQ
CopyStation while a copy job is running, it will be assigned some of the copy operations
automatically. Since all of the devices are connected to the PC via USB 2.0 and share the
bandwidth of the USB host controller or controllers, if you are copying to fast flash memory cards it
is recommended for performance reasons to use the internal copy feature and copy from a master
memory card. See chapter 4.4.1, copy job option “First fill master and then use it as source”.
3.21 Installing the PowerSoftware
Open the root directory of the supplied storage media (e.g. USB stick or CD-ROM) in Windows
Explorer and run the program „Setup.exe“. If you have downloaded the installation program from
the altec homepage or received it by email, run the program „Setup.exe“.
Notice that it is important that the user that is finally working with the PowerSoftware hat got
administrator rights (in both Windows XP and Vista/7 case)!
59/61