User guide

With the FAT checks & optimization option, the data of the MBR, the partition sector and the FAT
copies are verified for integrity.
The Write Protection tab is used to set and remove the write protection bits on SD/MMC cards. If
the write protection bit has previously been set on the cards, you must choose “Remove write
protection” to allow data to be written.
The write protection will be removed before starting any other operations in the copy job. Choose
“Set temporary write protection” or “Set permanent write protection” to write protect SD/MMC
cards. This will be done after completing all other operations in the copy job.
Also you can define a password for locking read and write access to SD/MMC card. You can use a
the same password for all cards or use an external program for individual password creation (see
chapter 3.2.19).
32/61